CNG-02509T高压拉断阀

一、CNG-025-09T高压拉断阀的简介：
高压拉断阀的品牌是“中力”，它的产品型号有CNG-025-09T，公称口径是DN6-DN80，所能承受的公称压力是42.0MPa 、6000Psi，主要的制作材质是不锈钢316SS，它的拉断力为400-600N/M，可以工作于压缩天然气，氧气，氮气等介质环境中，它适宜的工作温度是-180至150℃。
二、江苏中力阀门的标准与产品结构：
1．设计：API6D、JB/T7749
2．阀门常规检查和试验：按API598标准。
3．阀门低温检查和试验：按JB/T7749。
4．驱动方式： 手动、伞齿轮传动及电动驱动装置。
5．阀座形式： 阀座采用焊接结构，密封面堆焊钴基硬质合金，保证阀门的密封性能。
6．闸板采用弹性结构，在进压端设计卸压孔。
7．单向密封的阀门阀体上标有流向标志。
8．低温球阀、闸阀、截止阀，蝶阀采用长颈结构，以保护填料。
9．超低温球阀标准：JB/T8。
三、江苏中力阀门的产品说明：
紧急拉断阀设计安装在压缩天然气（CNG)加气站的加气机和装卸软管上，当承受一定拉力时，拉断阀会自动断开，在断开的同时，二边能有效密封，防止因装卸槽车的无意遛车而拉断装卸管引起泄漏，防止意外的发生而造成人员和设备的更大危害。此阀门需人工复位并可重复拉断使用。拉断阀使用标准组件设计，具有很好的互换性，能够很容易的将拉断阀从输送管道上取下，并且在维修、检测过程中不需要任何特殊工具。不锈钢拉断阀正常安装的情况下，可在一定的外力作用下，有效地分离并切断分离后的流体外漏，保护管路、设备的安全，在分离后释放压力，可重复推入往复使用。
江苏中力阀门有限公司是一家专业生产（硬密封球阀，气体单向阀，高压安全阀，高温高压截止阀，不锈钢过滤器，高压球阀，进口阀门，锻钢阀门）优质阀门的企业。是国家通用机械工业部配套生产骨干企业。公司拥有现代化多媒体研制团队、大型生产车间和完善的检测设施。公司集聚一批具有丰富经验的中高级专业人才，专业研制和生产各类高压阀门及其配套的管件等产品。产品采用ISO、API、ANSI、BS、DIN、NF、JIS、JPI、GB、JB等国内外标准生产，适用介质为天然气、水、蒸汽、液化气、油品等腐蚀性介质，主体材料有碳钢、不锈钢、合金钢、钛材等，并可根据客户要求冶炼和制造。
四．客户订货须知：
网站上的图片仅供参考，如您需要订购，要提供详细的产品结构，材质，压力等要求，我们会为您提供详细的方案。欢迎你来点致函我们！
First, Introduction of CNG-025-09T High Pressure Pull-and-Break Valve:
the brand of high-pressure pull-break valve is "Zhongli". Its product model is CNG-025-09T. Its nominal caliber is DN6-DN80. Its nominal pressure is 42.0MPa and 6000Psi. Its main material is stainless steel 316SS. Its pull-break force is 400-600N/M. It can work in compressed natural gas, oxygen, nitrogen and other media environments. Its suitable working temperature is -180-150 C.
Scend,Standard and product structure of Jiangsu Zhongli Valve:
1. Design: API6D, JB/T7749
2. Valve routine inspection and test: according to API 598 standard.
3. Valve low temperature inspection and test: according to JB/T7749.
4. Driving mode: manual, bevel gear drive and electric drive device.
5. Seat type: The seats are welded with cobalt-based cemented carbide overlaying on the sealing surface to ensure the sealing performance of the valves.
6. The gate adopts elastic structure, and the pressure relief hole is designed at the pressure end.
7. One-way sealed valve body is marked with flow direction sign.
8. Low temperature ball valves, gate valves, globe valves and butterfly valves adopt long neck structure to protect packing.
9. Ultra-low temperature ball valve standard: JB/T8.
Third,Product Description of Jiangsu Zhongli Valve:
Emergency pull-out valve is designed and installed on the filling machine and loading and unloading hose of compressed natural gas (CNG) filling station. When enduring certain pulling force, the pull-out valve will automatically disconnect. While disconnecting, both sides can effectively seal to prevent leakage caused by unintentional pull-off of loading and unloading pipe of loading and unloading tank truck, so as to prevent accidents from causing greater harm to personnel and equipment. The valve needs manual reset and can be repeatedly broken. The pull-out valve is designed with standard components and has good interchangeability. It can easily remove the pull-out valve from the pipeline, and no special tools are needed in the process of maintenance and testing. Under the condition of normal installation of stainless steel pull-out valve, it can effectively separate and cut off the fluid leakage after separation under certain external force, protect the safety of pipelines and equipment, release pressure after separation, and can be pushed back and forth for repeated use.
Jiangsu Zhongli Valve Co., Ltd. is a professional manufacturer of high-quality valves (hard-sealed ball valves, gas one-way valves, high-pressure safety valves, high-temperature and high-pressure shutoff valves, stainless steel filters, high-pressure ball valves, imported valves, forged steel valves). It is the backbone enterprise of supporting production of the National General Machinery Industry Ministry. The company has a modern multimedia development team, large-scale production workshop and advanced and perfect testing facilities. The company gathers a group of experienced middle and senior professionals, specializing in the development and production of various types of high-pressure valves and supporting pipe fittings and other products. The products are produced by ISO, API, ANSI, BS, DIN, NF, JIS, JPI, GB, JB and other advanced standards at home and abroad. The suitable medium is corrosive medium such as natural gas, water, steam, liquefied gas, oil, etc. The main materials are carbon steel, stainless steel, alloy steel, titanium, etc., and can be smelted and manufactured according to customer's requirements.
Tourth, Customer Order Notes:
Pictures on the website are for reference only. If you need to order, we will provide you with detailed product structure, material, pressure and other requirements. We will provide you with detailed solutions. Welcome to write to us!